HolSco Limited are agents for Wagner Instrumentation. Wagner is the world's best original and second source for all Oilfield Hydraulic Instrumentation including new assemblies and parts to interchange with other major manufacturers. Our standard stock holding in Aberdeen includes Pressure, Torque and Weight Indicator Systems as well as commonly used spares such as Check Valves, Gauge Case Fluid (W8), Red Hydraulic Fluid (W15), Connectors, Hand Pumps, Cases, Diaphragms, Recorder Charts etc. |
| |
|
| Wagner's Single Pointer Mud Pressure System (MG100) is designed to read pressure up to 15,000 psi. The system uses 1502 & 2202 hammer unions with diaphragm protectors, piston isolators or deboosters to separate mud, cement and the like from internal system parts. Gauges are available in box or panel mount versions and with hose lengths up to 50ft as standard. |
 |
| |
| The Dual Pointer Mud Pressure System (MG101) is designed to read pressure up to 16000 psi. The dual movement allows for monitoring of large and small pressure changes. The unit is primarily used in high pressure cementing and fracturing. It uses rugged diaphragm protectors, 1:1 piston isolators and 4:1 deboosters to separate drilling mud, chemicals and cement from the internal parts of the system. Gauges are available in box or panel mount versions and with hose lengths up to 50ft as standard. |
 |
| |
| Wagner's Unitised Standpipe Gauge (UMG) is a mud pressure system integrated into a single gauge assembly and comprises an inverted 6" gauge assy mounted on a hex housing with 2" male NPT thread complete with diaphragm cup, check valve & damper assy. Wagner's unitised gauges are also available with 1502 and 2202 Hammer Union Connection and Flanged Connections. |
 |
| |
| Wagner's 4:1 Debooster Unit is designed to reduce line pressure by a ratio of 4:1. This allows operators at the panel to see only 1/4 of the actual pressure which is seen at the manifold. Gauges are calibrated at 1/4 of the line pressure to reflect actual pressures. |
 |
| |
| Wagner's Pressure Recorders (R100) are available in 1, 2 & 3 pen options to record weight, torque and pressure up to 16,000 psi. The recorder uses standard 6" tube assys for ease of maintenance and calibration as well as being economical to replace if needed. The recorder uses standard 12" chart paper and disposable felt tip recorder pens. Manual wind mechanical clocks or multi speed electric clocks can be supplied. |
 |
| |
| Wagner's Wireline Systems are designed to provide accurate weight readings for downhole wireline operations. Systems are offered complete with 6" fluid filled rotating dial gauge with bracket, 100, 75 or 50 ft hose assy and tension load cell. Standard capacities are 2000, 3000, 4000, 5000 and 10000 Lbs and their metric equivalents. |
 |
| |
| Wagner's Hydraulic Crane Weight Systems are reliable and easy to use with dead line applications. They offer a varied range of capacities based on single load not to exceed 30,000 lbs. Systems are available with 6", 8.5" & 12" dry gauge models with multi-scale dials available. Radius systems show load capacities at specific angles. Each system comprises (as applicable) gauge with bracket, load cell & gauge whip hoses, boom hose, disconnects, load cell, yoke type clevis with pins, radius pot and hoses, hand pump & fluid. |
 |
| |
| Wagner's Anchor Type Weight Indicators are designed for accurate indication of hook load and weight on bit and are designed to work with all major deadline anchors using either tension or compression load cells. Panel mount and box mount systems are available in English and Metric divisions. Each system comprises a tough diaphragm type load cell, high pressure hose assy with disconnects, 12" or 16" indicator with complete dial set, and damper assy to dampen extreme shock and excessive pointer movement during tough drilling operations. |
 |
| |
| Wagner's Deflection Type Weight Indicator (DT101) is ideal for use with small to medium drilling and work-over rigs. The unit is portable, rugged, and dependable. Ready to be placed on the drill line right our of the box. Deflection type load cell may be used on wire line sizes 7/8" - 1 1/4". The system comes with self-contained steel box. Weight indicator head is complete with 10 dial set for use with different wire line sizes and lines strung, 25 ft hose assy, and deflection type load cell with c-clamp. |
 |
| |
| Wagner's Mini Weight Indicator (WBD100) is ideally suited for use with small drilling and production rigs up to 30,000lb single line load. The system comes with 6" or 8.5" gauge mounted in rugged metal box, 25 ft hose assy with disconnects, and either piston or diaphragm type load cell. Dual dial faces are available. Common reeving patterns of 2/4, 4/6, 6/8. The load cell attaches to rig floor with a universal clevis or shackles which eliminates the use of an anchor. |
 |
| |
| Wagner's Hydraulic Tank Weighing System eliminates guesswork when blending dry or wet material. Hydraulic self aligning compression load cells are friction free and ideal for bulk weighing of drilling muds, chemicals and cement. Totaliser versions are available allowing for a single readout from multiple sources. 2, 3 & 4 cell systems are available. Indicators can be provided in 8.5" fluid filled and 12" or 16" dry sizes and can be supplied in Lbs or KGs divisions as standard. |
|
| |
| Wagner's Universal Tong Line Pull Systems (TT100) are designed to give accurate readings for makeup & breakout torque. Standard systems comprise 6" fluid filled gauge with bracket, 25ft hose assy and tension cylinder with shackles and are available in panel or box mount with readouts in lbs, kgs and dual scale. |
 |
| |
| Wagner's Power Tong Systems (TT101) are designed to indicate accurate torque on each joint of pipe. Standard Systems comprise 6" fluid filled gauge with bracket, 5ft hose assy, cylinder or compression load cell and shackles and are available in panel mount or box mount versions. Dials are available in ft/lbs, kg/m and dual scale. |
|
| |
| Wagner's Rotary Torque System (RT100) is designed to help the driller during coring, milling & reaming operations. The system also helps avoid twist-offs and increase bit life by indicating when the drill string is torquing to unsafe levels. Systems comprise 6" fluid filled gauge with bracket, 2ft & 14ft hose assys with disconnects and idler assy with wheel. Gauge capacities are measured in points and are a relative indication of torque. |
 |
| |
| Wagner's FT/LB Torque System (TRT100) provides fro an accurate reading of rotary torque in ft/lbs. The system provides the driller with torque reading much as the RT100 system but in true ft/lbs. The system works by placing load cells on opposite corners of the rotary table which then measures the counter rotational force of the table. The system comprises 8.5" fluid filled totaliser head with (2) 25ft hose pigtails, (2) compression load cells, slide plates and turnbuckle. Each system is custom fitted to the table and rig. |
 |
| |
| Wagner's Electric Torque System (ET100) combines the use of either a box or panel mount 5" meter assy with an isolation amplifier to give a very accurate measurement of the rotary table. Standard system comes with 5" box or panel mount meter assy, 150ft cable harness and isolation amplifier box which mounts directly in the scr house. |
 |
| |
| Wagner's Coiled Tubing Weight Indicator comprises either 6" or 8" gauge assy, hose with disconnects and a compression load cell suitable for the weight requirements. The gauges are manufactured to either dual or single pointer applications depending on the needs of the unit. Gauges are fluid filled to ensure proper lubrication and shock resistance. Compression load cells are equipped with long lasting rubber / nylon diaphragms. |
 |
